1. First, press the volume button to set the desired volume level.

2. Then press the melody button to select 1 of the 5 melodies.

3. Press the connection button briefly and the LED indicator will flash slowly.

4. Send an “on” signal with a KlikAanKlikUit transmitter during the flashing.

5. As soon as the code is received, the wireless doorbell will emit 2x short beeps.

    

In the same way as for the first transmitter. Up to 4 transmitters can be stored in the receiver’s memory.

The memory is probably full. Up to 4 transmitters can be stored in the memory of the receiver. Follow the steps under “deregister” to solve this:

1. Press the link button for 1 second. The learning mode will be active for 15 seconds and the LED indicator on the receiver will blink slowly.
2. While the learning mode is active, send an “out” signal with the Trust Switch-in transmitter of which you want to delete the transmitter code from the memory of the receiver.
3. To confirm, the radio doorbell emits 2x short beeps Repeat this procedure to delete multiple transmitters or transmit codes.

1. Press the Connect button for 1 second. The learning mode will be active for 15 seconds and the LED indicator on the receiver will blink slowly.
2. While the learning mode is active, send an outgoing signal with the Trust Switch-in transmitter of which you want to delete the transmission code from the memory of the receiver.
3. To confirm, the radio doorbell emits 2x short beeps Repeat this procedure to delete multiple transmitters or transmit codes.

1. Press the connection button (approx. 8 seconds) until the LED indicator starts flashing rapidly. The erase mode will be active for 15 seconds and the LED indicator on the receiver will flash rapidly.
2. While the delete mode is active, press the teach button again for 1 second to confirm that you want to delete the memory completely.
3. To confirm, the radio doorbell emits 2 short beeps.

• Manual Mobile Doorbell Set
• Manual Plug-in Doorbell Set
• Other manuals